Follow

A50 + Base Station Gen 3 setup on Xbox One

For the video setup guide, please visit:  https://www.youtube.com/watch?v=laHVM10Q_5c&t

 

Required components:

A50 Headset

Base Station

USB Power Cable, Optical Cable

Xbox One Controller and Micro-USB Cable

 

First, ensure  the A50 Headset and Base Station have the most recent firmware installed. Connect the A50 Headset to the Base Station USB Port in order to update it on your PC via the ASTRO Command Center.

 

Connect the Base Station to your Xbox One. Insert the Base Station USB Power cable to the rear USB Port and connect the Optical cable to the Base Station and Xbox One optical connection located on the rear.

 

Next, turn on your Xbox One and wait for it to load to the home screen and make sure your Xbox One controller is powered on.

 

Navigate to the Setting menu from the dashboard. You can find this in Pinned applications or under the Games & Apps menu. Navigate to the Kinect option and under there disable the Kinect microphone (if applicable).

 

Go back to the settings menu and open up the display and sound settings menu. Under the HDMI Audio Menu Select “Off” and under the Optical Audio Menu select “Bitstream Out”. This will create a new menu below Optical audio. In this menu select “Dolby Digital”.

 

Turn your A50s on and ensure they are paired to the Base Station and game and voice balance on the left ear is at 50/50. You are now ready to use your A50s.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk